VICTOR Gas Coal Burner, ELECTRONIC IGNITION
Be honest; you bought that old house for its fireplaces, didn't you?
But it's so much work to tote in those tiny pieces of wood or that
dirty coal, and fight to get a fire started. Just think how often you'd
have a fire if all you had to do was touch a button on a remote control!
The Victor burner gives you the authentic look of a real coal fireplace
with no mess, no work!
The Victor can be used in your fireplace if you still have your old
ash cover, or it can be combined with a fret, or inserted into a old or
new cast iron coal basket.
Includes gas pan burner,
vermiculite, ceramic coals and remote control. Electronic ignition
means there's no standing pilot; the remote control lights the burner
and raises/lowers the flame height. The most energy efficient choice
because there's no costs of paying for gas to keep a pilot flame
burning. Choose LP (bottled) or Natural Gas (city gas). 15,000 to 30,000 btu
NOTE: If you're using the Victor with your existing hanging antique grate,
7-1/2" clearance is required between the floor of your fireplace and
the BOTTOM of the hanging grate in order to allow for the gas
Victor 1 is a trapezoid shape; 14-1/4" wide in the center, 9" wide at front, 9" wide at rear, 5-1/4" deep, 7" tall. (used with our cast iron surrounds)
Victor 2 is 14" wide at front, 11" wide at rear, 6" deep, 6-1/2" tall
Victor 3 is 12" wide at front, 10" wide at rear, 6" deep, 6-1/2" tall
is a vented gas product. It MUST be installed into a functioning wood
burning fireplace with a lined chimney. Minimum chimney size is 6"
round. Your fireplace damper, if one exists, must be removed or
permanently clamped open upon installation. If your chimney is damaged,
unlined or doesn't already draft and vent properly when you burn wood in
it, it is essential that the chimney performance & safety be
upgraded prior to using any open burning vented gas product!
Download INSTALLATION MANUAL