gas inserts

Ledgeview Gas Insert

Price: $3,098.00

Availability: in stock


Direct Vent Gas Fireplace Insert
Smaller size to fit small fireplaces 
Choice of Stone, Wood or Coal Effect Gas Fire

Clean, Contemporary Front


The LEDGEVIEW gas insert is designed to fit into very small fireplaces like the coal fireplaces that are taller than they are wide,  found in historic homes from the 1880's to 1930's. The contemporary stye front enhances your fireplace while providing exceptional heating efficiency. Enjoy the charm and architecture of your old house without it feeling "old fashioned".

A hand-held thermostat remote control keeps the room comfortable by modulating the flame to maintain a consistent warmth, rather than turning the burner on & off,a feature offering greater efficiency than other fireplace inserts on the market.

Set back from the decorative front so it's unobtrusive, the glass window prevents your warm air from being exhausted out of the chimney, keeping the room cozy. Two 3" diameter chimney liners are installed; one brings combustion air from outdoors, while the other liner exhausts the fumes. This offers the ultimate in fireplace efficiency and safety.

SELECT YOUR FIRE STYLE: Coal, Logs or Rocks (click image below to play video)



-Traditional log or stone effect gas fire with brick firebox liner creates an inviting fire that is also an effective and adjustable source of radiant heat.
-Direct Vent technology with glass window

-Includes child safety screen
-Top or Rear Venting for ultimate versatility of installation using a reversible flue collar.
- Fits very small fireplaces!
-Clean face contemporary front makes the fire the focal point of your room
-Includes multifunction HAND HELD REMOTE CONTROL: adjust flame
height, adjust heat output, set timer to cut your fire on just before you get home from work, a true welcome home!
- Ignition is achieved electronically using a 9V battery, eliminating the need for a standing pilot.
- Complies with California and New York energy codes; also approved in Massachusetts.
- Approved for venting vertically up to 40'
- Includes aluminum chimney liner system with chimney cap (pictured left)
- Optional fan kit available
- Optional 36" wide x 33" tall vintage iron trim kit available



Substitute a reflective glass
  firebox liner for
for the standard
brick liner for $259
Provides a sleek &
contemporary style
Bronze $2999 Black $2999 Pewter $3399  

Installation Manual

BTU input: 6,000 to 20,500
Efficiency:  74.4%-76.9%
Fuel:  LP or Natural Gas

Fits Minimum Fireplace Dimensions :
21 1/2" Front Width, 20 1/2" Rear Width
11-3/4" Depth and 27 1/2" Height ( For Top Venting Option )
16 1/2" Depth and 26" Height ( For Rear Venting Option )


Front Dimensions   Side View     Chimney Liner  
OPTIONAL VENTING One of the methods below may be preferred.
may be useful if the chimney contains blockages or has been torn down.
SINGLE LINER venting is helpful for chimneys that are especially small or if it has extreme offsets

In cases where the chimney has been torn down, is too small for two 3" liners or is blocked, you can cut a hole through the smoke chamber of the fireplace and install a horizontal vent termination. For use on chimneys that are located on an exterior wall of your home only.


This option provides a single double wall liner; the inside liner is 3" and the outside diameter is 4-3/4".








click photos to enlarge